Mechwat are manufacturer of Portable weighbridge office cabin for mines, power project, cement industry, construction site, road project, etc. Recently, Mechwat has manufactured and supplied Porta-cabin [Portable Weighbridge Office Cabin ] along with attached washroom facility for Saurashtra cement Ltd at Ran Bauxite mine , Ran, Dev Bhuma Dwarka.
-
- Portable weigh bridge office cabin
-
- Portable weigh bridge office cabin
Detailed Description of Portable Weighbridge Office are as :
| S.No. | Features | Detail |
| 1 | Container Shell & Size | [LxWxH] : 18 ft x 10 ft x 8.5 ft. The shell fabricated from tested quality steel duly welded, comprising of base frame, peripheral structure, self-draining roof, entry door and windows. The four corner Column will be sufficiently strengthened to facilitate transportation, liftingand placing. |
| 2 | Base Frame | The base frame would be made of pressed mild steel channel section. The main structural element will be 80 X 40 SQ pipe 2.5mm thick and cross membersshould be of ‘Z’ channels section size 60mm x 70 mm x 60mm. |
| 3 | Side and End Walls | The side and end frame made out of pressed sections of suitable profiles / Pillars of sufficient strength. Exterior wall made up of 1.6 mm MS specially corrugated sheet, whereas 6mm thick decorative particle board wall cladding sheet to be used for interior walls. These steel sheets will be treated for corrosion resistant. Panels will be vertically corrugated. Sheets will be continuously welded to top side and base structure so as to offer better strength to weight ratio. All gaps to be sealed at edges and at seam, bottom etc. to prevent ingress of moisture. |
| 4 | Insulation | 50 mm thick Glass wool Insulation would be used for walls and 50 mm thick insulation material to be provided for roof and sidewalls. |
| 5 | Inner Panelling | The interior will be aesthetically finished so as to give custom-built appearance with extremely high-quality workmanship. All vertical and horizontal corners should be neatly and smoothly finished. The Panelling of sidewalls and roof will be done of 4 mm thick Waterproof ACP Panel. |
| 6 | Flooring Systems | On the bottom frame, 18 mm thick composite cement sheet will be fixed by means of self-tapping screw. 1.2 mm thick Aluminum Chequered plate will be fixed on the cement sheet. |
| 7 | Roof | Self-draining type roof will be made out of 1.6 mm thick M.S. Sheet, adequate roof bows are to be provided. Roof will be adequately cambered for draining of rainwater. Interior panelling would be done in 4 mm ACP Panel with adequate insulation |
| 8 | Windows | Aluminum windows 2.5’ feet x 3’ feet minimum, sliding type will be provided made of Aluminum Profile section, 4 mm thick clear vision glasses. All windows/doors to have external weather shed. |
| 9 | Door | The size of the half window door will be of 6.5’ height x 3’.3” width. The door will be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door would be double skin steel construction with 50 mm thick Glass wool insulation. The door interior will be finished with same material matching with that of the bunk house interior. The door will be provided with locking arrangement with separate handles on both sides of the door as required- |
| 10 | Electrical System | The Bunk Houses will be provided with electrical wiring suitable for 250 volt, 50 HZ single phase AC power supply. All electrical wiring would be concealed. Bulk head and tube lights will be provided as required. Suitable copper cables will be used for lighting circuits. The cables used will be of 1.5 sq. mm. and 2.5 sq. mm. cables for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire will be used for wiring to be done in PVC conduit with small size distribution board with MCB protection and to separate with main supply. Light
fittings included LED lights, ceiling fans as per electrical plan will be provided. Internal switchboard and Pre-wiring for air conditioners will be provided. All plugs & sockets will be as per your Country’s Standard. Electrical Wiring and Fittings will be done as per your Country’s Standard-
1. 2 nos. wall fan provided [Crompton Make] 2. 4 nos. LED Light Provided [Crompton Make] 3. Provision of Split AC Provided 4. MCB & DB Box provided 5. 5 Nos. Bulkhead Light Provided for Exterior. 6. 1 nos 250 mm ventilator provided [ Crompton make] |
| 11 | Painting | All components will be primed. Quoted with zinc chromate, primer. The external surfaces will be initially prime with Epoxy primer. And finally, Fine quality decorative Epoxy or PU paint will be applied in final stage- |
| 12 | Hooks & Legs | 4 Hooks on top of the cabin & 6 legs of 8” will be Provided. |
| 13 | Furniture Material | Client Scope |
| 14 | Washroom Detail | Size : 4 ft x 10 ft
1nos : Western WC-Sanitation make 1 nos : 18” washbasin sanitation make 1 nos : 18” x 24” mirror 3 nos : CP angle cock 1 nos : Two way bibcock 1 nos : CP Health Faucet 1 nos : Flush Tank-15 liter 1 nos : Ventilator. 1 nos : Urinal-sanitation make 1nos – Pillar coke -PVC Polo |
Every Brand Has Stories Tell-Stories That Will Not Only Engage, Inform, Surprise, Delight, And Impact Their Audience But Will Also Deliver On Measurable Business Goals.
Latest Posts
- Container Homes 17 March 22
- Gender Equality and Social Inclusion (GESI) in WASH 14 June 22
- Flatpack Container Housing 22 March 22
Contact Us
A/209, Sobo Centre, South Bopal,
Ahmedabad- 380058
Phone: 027-17402196
Mobile: (+91) 9824528967
Email: info@mechwat.com
26, Bala Tripura industrial estate,
Shah alloys road, Santej
TA : Kalol, Gandhinagar – 382721
Mobile: (+91) 9978350694