1924- Portable Toilet

Portable Toilet

Product Code : Mechwat -1924

S.No. Features Detail
1 Size [ L x W x H] in mm Outer : [  1950 x 1500 x 3100] in mm
Inner : [ 1150 mm x 1150 mm x 2000 ] in mm
2 Construction of Material Steel : Load Bearing Member : IS  4923  or Equivalent
Side End Walls : MS : IS 1079  or  IS 513 or Equivalent
Roof : IS 1079 or IS 513 or Equivalent
Floor : IS 6307 or Equivalent
Sanitaryware : IS 2556 or Equivalent
  Sewage CollectionTank : IS 14399 or Equivalent
Paint : IS 14209 or Equivalent
3 Welding The shell of the structural cabin is of all weld construction. All the external welding will be continuous uniform and full of penetration.
4 Structure Frame Structure Frame Made from  MS Square Pipe  50 mm x 50 mm x 3mm Equivalent to IS 14209 or Equivalent. The main load bearing  member such as per posts, base, members, bottom side rail, top side rail & header are press formed profile of appropriate  geometry.
5 Shell The Outer Shell of Structural Toilet cabin manufactured with 1.2 mm CR Steel Sheet Equivalent to IS 1079  or IS 513 or Equivalent.
6 Side and End Walls External walls are vertically corrugated 1.2 mm thick ms steel sheet equivalent to IS 1079 or IS 513 or Equivalent. The Corrugated panel are continuously butt welded to form entire side wall and the assembled side wall is continuously welded to the peripheral frame members. The side and end walls will also provide cut outs for windows /doors. All the cut out after fixing the equivalent will be weather tight and proper channeling will be provided for the window opening.
7 Roof [Self Draing Type] The roof of the shell will be manufactured from 1.2 mm plain MS Sheet .
8 Flooring System 12 mm pvc sheet laid on top and secured by self tapping screw  to the base members. 1 mm thick PVC vinyl paper will be fixed on 12 mm pvc sheet.
9 Inner Paneling The interiors would be aesthetically finished so as to give a pleasing appearance with high quality workmanship. All joints as well as vertical and horizontal corners shall be neat and smoothly finished. The inside panel of sides, end walls & roof will consist of 4 mm ACP sheet. Joints will be covered with silicone sealant. False ceiling with 4 mm ACP sheet will be provided
10 Insulation Structural cabin will be insulation on sides, end walls with 50 mm thick glass  wool and roof  with 75 mm thick glass wool.
11 Portable Stair with Platforms Portable stair with platform made from MS Square pipe 50 mm x 50 mm x 3 mm equivalent to IS 4924 or equivalent with following the construction site safety  rule equivalent to 7293
12 Electricals All wiring shall be concealed type inside the paneling and shall be of PVC insulated copper wire of ISI quality in PVC/Reinforced Steel Flexible Tubing/Conduits of ISI grade. Scope of electricals  included the fittings  of 250 mm exhaust ventilator, LED Bulb, and Switch Board.
13 Plumbing and sanitary fittings All the water line piping and connection are UPVC schedule-40 / CPVC -SDR-11. Drain line and connection are PVC schedule -40. All WC and Urinal are in ceramic material from cera/sanitation/equivalent make. All the plumbing and sanitary material fittings  are equivalent to IS 1172 or Equivalent.
14 Painting Paint are equivalent to IS 14209 or equivalent to Primer Coat: Zinc Rich Epoxy Primer Intermediate Coat : Epoxy Polyamide 60 microns. Top Coat : Chlorinated rubber paint 50 microns / bituminous paint.
15 Sewage  Collection Sewage Collection tank made of 10 mm FRP material which is equivalent to  IS 14399 or Equivalent. Capacity of Sewage water collection tank is 500 liter.
16 Accessories of Sanitary & Hardware [Western WC Block] WC: Western-Ceramic : 1 Nos : Make -CERA
Cistern &  Seat Cover : 1 Set
Health Faucet : CP: 1 Nos
Two way Bibcock :CP : 1Nos
Angle Cock : CP : 3 Nos
Pillar Cock : CP: 1 Nos
Wash Basin : Ceramic : 1 Nos
Urinal : Ceramic : 1 Nos
Door Lock : CP :1Nos
Mirror Cabin : 1 Nos
17 Accessories of Sanitary & Hardware [Indian WC Block] WC – Indian -SS304-Blue Star Make
Cistern : 1 Set
Bib Cock : CP : 1 Nos
Bin with Chain: SS- 1 nos